# Diassemble BOM should show already assembled material during disassembly process

**URL:** <https://community.criticalmanufacturing.com/t/diassemble-bom-should-show-already-assembled-material-during-disassembly-process/574>\
**Category:** Modelling & Configuration\
**Created:** [March 4, 2025, 4:35am UTC](https://community.criticalmanufacturing.com/t/diassemble-bom-should-show-already-assembled-material-during-disassembly-process/574 "2025-03-04T04:35:44Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![sumit\_sehta](https://avatars.discourse-cdn.com/v4/letter/s/b5a626/32.png) [@sumit\_sehta](https://community.criticalmanufacturing.com/u/sumit_sehta)\
**Post date:** [March 4, 2025, 4:35am UTC](https://community.criticalmanufacturing.com/t/diassemble-bom-should-show-already-assembled-material-during-disassembly-process/574/1 "2025-03-04T04:35:44Z")

</div>

Hi Team,

We have requirement to disassemble few BOM parts only (not complete BOM parts, BUT OOB it will ask to disassemble all BOM part. Is there any option to make it optional? Means user can disassemble only required parts like we have under “Replace Assembled”.

We have to keep all parts under BOM as depending on the situation we may or may not dissemble all BOM parts

 ![](https://canada1.discourse-cdn.com/flex050/uploads/community_criticalmanufacturing/original/1X/eaf9468fb587321084d3fe491e12f0113638c29f.jpeg)